INDOOR PROXIMITY CARD READER PLUS BIOMETRIC FINGERPRINT SENSOR

We’ve coupled a proximity card reader with a biometric fingerprint sensor to create a door/portal control device for facilities that require identity confirmation with controlled access. This proximity access card reader is coupled with a biometric fingerprint sensor for extra security. Maximum distance is approx. 15cm (5.9 inches) Constructed of tough ABS plastic. Designed for indoor installation Short response time Standalone or use with PC (software included) Large fingerprint capacity & high recognition rate Backup recognition mode for pool fingerprints, password or ID card Master card assignable Card capacity: 10,000 users One RS-485 port supported for networking Fingerprint database download/upload supported Built-in watchdog to prevent the system from halting External reader port 26/34 bit Wiegand format for anti-pass-back. Alarm function available (tamper, force entrance, door open too long) Keypad locks for 30 seconds, while continuous error operation Universal serial port supported for LED display, printer, lift controller, ETC Lift control: 5,000/32 stops Access mode: card only, card or PIN, card and PIN Fingerprint access mode: card & fingerprint, card or PIN & fingerprint, card & PIN & fingerprint, 4 digit user number & fingerprint Matching mode: High end optical sensor 500 dpi resolution @ 8 bit gray scale Fingerprint capacity: 4500 Area of input: 18mm x 16mm Panel display: English, French, Italian, Danish, Greek, Spanish External reader port: suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader Networking: RS-485, 9600, N, 8, 1 Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. / latch type Alarm relay: 12VDC @ 2A NO/NC/jumper selectable 0.0-600 sec. Serial port: supported for ACC995, LED display, relay board, printer (4800, N, 8, 1) Anti-pass-back: yes Door group: 255 Time zone: 63 Event storage capacity: 11,000 Card reading range: 8-15cm (3.15″-5.91″) Power: 9-24VDC, <5W Temperature: -20°C - 75°C (-4°F - 167°F)